Fitting front mount

High Guys started stripping the front end down to fit the front mount.
Had a write mare just getting the bloody bumper off, every stud/bolt that holds the bumper on napped just for a laugh. But its off now i've offered the pipes up and everything seems straight forward enough.
Just need to get the angle grinder out and start chopping some metal out.

[You must be registered and logged in to see this image.]

good luck m8

u brave man - scoobycarl couldnt face cutting his bumper so he took it to Kindons

Thanks, and i dont know about being brave lol. Im not looking forward to it one bit.
The front mount is mounted now with all the pipes fitted and fitting the pipes alone was a job in itself.
Ready to start chopping up the bumper now

cutting the bumper is where the fun begins, especialy on a classic with a splitter, i use a jig saw on full blast

i used a dremel and about 10 cutting discs

Andy K wrote:

cutting the bumper is where the fun begins, especialy on a classic with a splitter, i use a jig saw on full blast

FPMSL

Got the front mount on now everything back together and gonna start with the bumper tomorrow

I've got a dremmel gonna get a few cutting discs and take my time, dont fancy the jigsaw on full tilt idea funny enough lol.

Andy

a dremmel is for girls lol, get the jigsaw on the job

Andy K wrote:

a dremmel is for girls lol, get the jigsaw on the job

Maybe after a few more cans lol, but while im sobre i'll stick with the girlie dremmel

Hi finished the fitting of my front mount yesterday
and to say cutting the bumper to refit was a nightmare is an understatement needless to say i will not be doing another

Just need to get it back up to Andy Forrest for another remap.

Cheers Andy

[img][You must be registered and logged in to see this image.][/img]

looks really well andy.. and id get a remap asap bud

Looks like a good job mate

Thanks for the nice comments, just needs a little tweek somewhere seems to rattle a little now and again.
I will try to get it back to Andy next month for the remap, on the last remap he turned the boost up to 18 psi and said he would'nt take it any higher because the original intercooler was nacky but i told him i was fitting a front mount, he said bring it back and i'll turn it up 21.

Cheers Andy

looks good on the car
good job m8

Cheers, i need a numberplate now. Is there anybody on here doing vinyls.

Andy

i just had 1 made up at local motor factors for £7 if that any help

Thats alright cheers Baldy

looks good, i take it you had fun cutting the bumper

Andy K wrote:

looks good, i take it you had fun cutting the bumper

Happy with the result though.

Andy