will i need a remap again if i put on a 22psi/1.5 actuator on my vf23 turbo plus will i need to do anything else to the car ?
Jonny Gav Admin
Posts : 6837 Join date : 2010-03-12 Age : 53 Location : Durham
Subject: Re: vf23 actuators Wed 15 Jun - 17:40
Why are you wanting to run 1.5 bar mate, to be honest the VF23 isn't the most robust of the VF range, I personally wouldn't run more than 1.3 bar on one if I wanted it to last.
impreza1234
Posts : 486 Join date : 2010-04-01 Age : 47
Subject: Re: vf23 actuators Wed 15 Jun - 17:44
ok will go for that just wasnt sure tbh would it need remap ?
Jonny Gav Admin
Posts : 6837 Join date : 2010-03-12 Age : 53 Location : Durham
Subject: Re: vf23 actuators Wed 15 Jun - 17:48
What boost are you getting at the moment and what was it mapped to?
impreza1234
Posts : 486 Join date : 2010-04-01 Age : 47
Subject: Re: vf23 actuators Wed 15 Jun - 17:49
it boosted 21 psi at motorscope and shows 20 psi on gauge
not sure what andy f set boost at
Jonny Gav Admin
Posts : 6837 Join date : 2010-03-12 Age : 53 Location : Durham
Subject: Re: vf23 actuators Wed 15 Jun - 19:38
20psi is 1.37 bar mate so you are on the safe limit of the turbo now.
impreza1234
Posts : 486 Join date : 2010-04-01 Age : 47
Subject: Re: vf23 actuators Wed 15 Jun - 20:40
so 1.3 bar one is safe mate ?
impreza1234
Posts : 486 Join date : 2010-04-01 Age : 47
Subject: Re: vf23 actuators Wed 15 Jun - 21:17
still need new one as this one keeps sticking and getting worse
quote ohh lisa turbo is on way out need new one best get a vf 43/48 and its a bonus better mpg with these ones just need the 550s to pair up and map
reply ok you know best just get them when we have money
Jonny Gav Admin
Posts : 6837 Join date : 2010-03-12 Age : 53 Location : Durham
Subject: Re: vf23 actuators Wed 15 Jun - 21:23
biglad1 wrote:
so 1.3 bar one is safe mate ?
Yeah but you would be better off fitting a standard one so you can also use the ecu's boost control system.
you say its sticking, it may just be the pivot pin is sticking, the actuator its self may be fine.
impreza1234
Posts : 486 Join date : 2010-04-01 Age : 47
Subject: Re: vf23 actuators Wed 15 Jun - 21:28
so just undo fixings so to speak quick rub down and lube/grease ?
FINN Admin
Posts : 4445 Join date : 2010-03-16 Age : 49 Location : houghton-le-spring (the garage)
Subject: Re: vf23 actuators Wed 15 Jun - 22:27
av seen a few sticky ones in the past, and yes biglad a bit release spray/grease normally sorts them mate