Boost Control Issues

Hi Guys.

Looking for a litttle advice on a Apexi AVCR.

I had the car fettled at the weekend and every thing was ok running at 1.3 Bar tailing of and pretty much holidng at 1.2Bar till 6500rpm. set at 1.35 at 87% Duty

Today i came to work and it was boosting to 1.85!!!!! AFR readings seem very crazy too reading 11.3 on Full Boost.. ( unsure if the wide band sensor if furbed )

I changed to Setting B and it boosted to 1.1Bar and held 1.0 to 6500rpm.

I have resoldered the power wires on the AVCR after the remap as they were only connected with spades.

afr 11.3 on full boost is about right bud

Andy

Thanks Andy, Any ideas on the over boot issues???