Washer jets & methanol ?.

Been clarting on this week to see what meths mix i can add without too much mapping, using the Apexi handheld commander to tune the PFC, Managed 10% with 5degs of timing added, but the strange thing is when i gave it some WOT, me front washers started covering me windscreen with water. Any ideas, as this as never happened before (well only from the rear one at York dragway), too many torques forcing the water out?

Funny enough I had the same problem with me Type R when running over 400hp, fitted a 1 way valve from halfrauds and it solved the problem

Also test drove an Evo 6 that did it but it didn't have anything to do with power as it was as flat as a witches tit

my V5 sti used 2 do this on the rear screen, could a fook findout why it was happening

only done it wen it came onto boost

sorted now.

a unplugged the fooker lol

Johnny i tried fitting a one way valve, same as wots on the rears, but the water thats in the pipe between the valve & the jets still gets blown out, going for Finns idea, unplug the fookers,

Why not put the one way valve 1cm from the jets then just a tiny splash will happen lol

my foz does this since been mapped hmmm does your head in

mine also did this after i relocated it to the boot but found it was on braking. think its to do with a pressure change in the bottle.