Posts : 1887 Join date : 2010-03-30 Location : Driving with a big grin
Subject: intake, take off delete Thu 25 Oct - 8:03
Is it possible to remove the take off for the solinoid on the intake pipe. Here.
And re-route it to the back of the inlet manifold Here.
The vacum pipe connects to the boost solinoid Here.
I think it will work but wanting a definitive answer. Ta.
Andy Kindon
Posts : 1872 Join date : 2010-03-18 Age : 48 Location : Unit 10 Stella gill, Cheste-le-street
Subject: Re: intake, take off delete Thu 25 Oct - 9:54
its just a vent for solenoid, just remove it altogether will make no difference at all regardless if 2 port or 3 port
Jonny Gav Admin
Posts : 6837 Join date : 2010-03-12 Age : 53 Location : Durham
Subject: Re: intake, take off delete Thu 25 Oct - 11:02
Agree with Andy, I have removed the pipe and vented the solenoid exit to atmosphere, then blanked off the pipe on the intake to prevent it sucking air after the MAF.
maxboost
Posts : 1887 Join date : 2010-03-30 Location : Driving with a big grin
Subject: Re: intake, take off delete Thu 25 Oct - 17:14
Cheers lads wasn't sure if i could vent it or not. Removing the inlet connector rather than bunging it, then using self bonding silicone tape, which is my latest find which works a treat.
Calendar
wasn't sure if i could vent it or not. Removing the inlet connector rather than bunging it, then using self bonding silicone tape, which is my latest find which works a treat.