8 psi and a cheap headgasket =

the boost guage saved the reading pritty shocking tbh

fook me thats bad only 8psi just proves buy cheap buy twice

yup it give way on 8 was at 16 before which is about standard

thought u knew how to build an engine

here we again

Trust you Baldy.

whos saying i built it lol

just fixing it

doesnt matter who built it , it was the part that failed

Not wishing to stir but the title of your post indicates the use of a cheap gasket.Hence it would make a difference to who built it as they used a cheap gasket and not an OEM one or uprated gasket if for a modified application.But your quite correct in the fact that it was indeed the part that failed.Best regards Mal....

if the heasd werent skimmed that could have been a part of it..


and im pleased were on this as in that case if the engine was built properly that means dougy used cheap head gaskets on the engine i bought from him and gipa as there were absolute shite aswell..

Technically the thing to do is identify why the head gasket has failed, more often than not its overheating and not a fault of the gasket. Could even be the head hasn't been torqued down correctly

shabby workmanship

nt really daz as nt torquing dwn causes all sorts of bother engine would of over heated at one point

rite well we have found a few items of why it could fail and lets think i never dorve over 3k revs never dorve over .5bar boost and ran it on the best oil and yet the headgasket went only one side whoever fitted this hg is a shit mechanic and also who ever built mine is aswell but u guess we dont need to have too many gueses

i herd your eml was on and oil over max boost drive, bt there u go

Is this gonna happen on every thread?

Getting very boing boing billy fookin boring now

not at all as it was on due to a very minor problem ans i never parked on marks drive!!! ya tool i had a very little oil leak from the oil return pipe for less than 1 day as ive told you soo many fookin times you idiot!!! it was fixed after less than 5 miles of driving .. and what the fucks that got anything to do with your idiot mate building a shit engine that went bang after only a few hundred miles and before you open your mouth again i was working away and drove less than 60mph all the way to dundee and back!!!!

facts are youve showed that people can build shit

and cause gasket blowes who bilt that engine then????

phils scooby wrote:

nt really daz as nt torquing dwn causes all sorts of bother engine would of over heated at one point

Its will have overheated at some point I can see that, but whos to say the head was torqued properly. Believe me I see people buying parts for cars every day and while most of our customers know what they are doing there are too many armchair mechanics out there who don't
I've seen a customer at our counter ask for a discount on a head gasket that's been bent in transit, when we said we'd have to order another in he said "it'll be ok it'll tighten down"
And Robbo you're right

ha quality daz i can imagine


hit a nerve deano all i said is what i herd

like u keep going on i dnt ask for advice bt if you know me you would know i ring drew

Robbo_22 wrote:

Is this gonna happen on every thread?

Getting very boing boing billy fookin boring now

i was thinking the same

YOU RING DREW?? HE CALLED YOU FULL OF SHIT NOT SO LONG AGO!!!

AND YES YOU HIT A NERVE YOU IDIOT AS YOUR fookin TIT OF A MATE COST ME ALOT OF MONEY WHICH I COULDNT AFFORD TO LOOSE IF YOU THINK THATS FUNNY THEN YOUR AN ARSEHOLE!!!!!!!!!

AGAIN YOUR RUBBING PEOPLE UP THE WRONG WAY!!!!!

IF YOU DONT WANT YOUR THREADS TO GO THE SAME AS ALL YOUR THREADS STOP MAKING STUPID COMMENTS ON THEM!!!!

Robbo_22 wrote:

Is this gonna happen on every thread?

Getting very boing boing billy fookin boring now

yes its starting to annoy me now aswell.

and am going to put a stop to all this crap.

big deano wrote:

YOU RING DREW?? HE CALLED YOU FULL OF SHIT NOT SO LONG AGO!!!

AND YES YOU HIT A NERVE YOU IDIOT AS YOUR fookin TIT OF A MATE COST ME ALOT OF MONEY WHICH I COULDNT AFFORD TO LOOSE IF YOU THINK THATS FUNNY THEN YOUR AN ARSEHOLE!!!!!!!!!

AGAIN YOUR RUBBING PEOPLE UP THE WRONG WAY!!!!!

IF YOU DONT WANT YOUR THREADS TO GO THE SAME AS ALL YOUR THREADS STOP MAKING STUPID COMMENTS ON THEM!!!!

dean look we all aware the problems dougie caused for you.

personally i wouldnt let dougie put oil on me kids bmx chain.

as for philscooby= yes he is a young lad and is wanting to build is own high powered engine.

wether it will ever happen is upto him.

personally i have nothing against phil or you dean.

av always answered the phones to u 2 and advised uz, and bought/sold the odd part t u 2,

but this bitching at each other has too stop on "OWA" open forum.

OWA= meaning this forum was setup too get away from the nuggets on TTS who choose to run it like a boot camp ??

i personally dont want NESF to go down the same route.

Deano keep me out of your childish annoying little fk'n gripes and get a fk'n life all we here on here every day is you twisting about dougie, we know you have a problem with him but I think most on here are sick to death of hereing about it every fk'n post ya make

dont know any of yous bar a few memebers ive met but ide say to both of the lads bickering just let it go man lifes to short to bitch at each other just grow up man and be done with it

ill just sit and await the greif now lol

Fkin he'll man I'm not even going to Lower meself to this shite again

Dougies not even on here so why every post it mentions him , I've washed me hands with him years ago basically cos he's a liability Nd a piss head I done one job with him nd that was supplying an engine never again .

Deano you know exactly wot happened , oil leaks , engine lights etc !!

If this is goin to keep going on just delete my account cos I can't b arsed with my name getting brought into a job Wich I still believe was down to the person who fitted the engine even though dougie has fucked up alot of engines ........