Engine light code 45 classic

My subaru engine light came on then I started it up to go to work when you drive and turbo kicks in it like the fuel cuts and back of iv plug to two green wires in and come up code 45 is this map senser

Hello mate got a obd2 reader and the code book says turbo charger boost solenoid circuit open hope this helps

Thanks mate just got figure out what it is

Mate unplug your boost sol see if it resets itself

Done it mate when I plug the two plugs together it clicks so I would say it's working

The two plugs green under the dash are engine code reader ?
The two plugs blue is that the memory for engine code ?

So unplug the blue ones and plug the two green to find code and turn ignition on fans ect come on is that right to read code

It says on the scooby forum it's a pressure sensor but the other says boost sol so not sure

Thanks for your help

will try pressure senser which I think is map senser mate

No probs mate

Unplug it check pipes disconnected battery for 1 hour and came back on any ideas to what it

I had that on mine mate. Map sensor and boost solenoid got a squirt of brake cleaner and job done. Just connect black plugs up so they kick in

Mate did you just squirt it thou pipe work on them ?

Mate black plugs ?

Under dash ? Mine are green or blue

Mate which black plug iv only got green or blue under dash

Will be the blue ones Gary they should be black.. The green ones are for test and to reset your ecu..

Squirt some into map and boost sol, connect black/blue connectors up for a tad and give it a try

Try mate but nothing any one got map senser for classic

Iv changed map senser change solinode and everything on the bracket still the same  

Any had this problem befor iv book into drews on Thursday is there any thing I can check in mean time

Well think iv sorted was hole in bov pipe boost not and no fuel cut