Spec Sheets to display on NBO Stand:

Hope yav got enough paper for mine :-) lol

GIPA wrote:

Hope yav got enough paper for mine :-) lol

thinking of doing yours on an A1 piece of paper, the list is that long

pm'd my spec across

iddysti wrote:

Dave

Thats spot on mate, even better than I was thinking, I am just changing the spec text to stand out abit more.

I am also removing peoples full names, just leaving there nickname and also any security you have on the cars dont want people knowing what you have in the way of protection.

The last thing I want is people knowing the security on these cars then trying to nick them.

Iddy

No problem. The reason i put the name bit on was for more for in house use as in i know a few people on here but a lot of people all i know about them is there user name, some people it's quite obvious others not so.

As for security details don't want them any where near public reading.

looking forward to see what you come up with

iddysti wrote:

GIPA wrote:

Hope yav got enough paper for mine :-) lol

thinking of doing yours on an A1 piece of paper, the list is that long

Pmsl

I'llsort mine out tomorrow if that ok with you iddy?

stevebt wrote:

I'llsort mine out tomorrow if that ok with you iddy?

no problem, I am going to need an A1 piece of paper for yours as well.

So I need to keep it small?

stevebt wrote:

So I need to keep it small?

no problem steve

being playing again



a background made up of nesf members cars

You are pretty good at that Dave, do you fancy doing a few new headers for the forum using the same logo and background colour???

We only have the one at the moment and the winter one.

I think I did well and I have kept small There is loads I have missed but I think I have added the bits most people will know?


MY03 SUBARU IMPREZA JDM STI

mapping has been done by

Paul Blamire, Pat Hebron and Andy Forrest



Bodywork and exterior

Prodrive Pff7's 225/40/18
Chargespeed rear diffuser, Chargespeed side skirts
Chargespeed front bumper, Chargespeed vented wings


Drivetrain


Carbonetic tripple plate carbon clutch


Engine
EJ22 closed deck block
14mm WRC Head stud kit
14mm head dowel
Cosworth head stopper gasket
RCM twisted rotated pipework
RCCM 44mm eternal wastegate V band
SD Motorsport custom catch can
Lateral Wiseco custon 2.35 custom pistons including yprated
Lateral Crower h section race rods
Deck block machie for 14mm studs
ACL race series bearings, RCMS oil pump
All parts to blueprint, dry built and Plasti-gauged


Long Block and Ancillaries

AVCS heads ported and polished with uprated valves
Lateral Head gaskets, RCMS 14mm head studs
Custom 272 cams, RCM uprated oil pump
RCM inlet manifold spacers
RCM air filter (25cm tall) and custom trumpet
Magnus inlet manifold
3 bold headers "Lateral spec"
APS DR725 FMIC
HKS hyper 3" exhaust system
Zen performance oilcooler
Custom intercooler pipework
group N engine ad gearbox mounts
RCM aloy vernier puley kit for vvt
RCM turbo outlet hose for wisted kit
Induction hose
Titanium exhaust wrap
T3 Titanium turbo shield
RCM timing belt guide
custom braided turbo/VVT oil feed and all water pipe
battery relocation kit


Fueling

Bosch 044 fuel pump, -6 Braided fuel hose throughout
1000cc Injector Dynamics
SX Fuel pressure regulator
GDA fuel rails
fuellab filter


Electronics and interior

Autronics ecu mapped by Paul blamire, 4bar map sensor
Defi link system with 60mm bf Oil pressure, oil temp and manifold pressure
Pioneer AVH 6500 dvd player with avics sat nav system
Full Black leather trim
Sparco pro 2000 seats for track
Luke 6 point harneses for track

Suspension

HSD coilovers
Whiteline 24mm adjustable rear roll bar
Whiteline 22mm adjsutable front roll bar
Whiteline Anti lift kit

Brakes

AP 6 Pots with 330mm discs, Goodrige braided hoses all round
Standard rear brakes

Jonny Gav wrote:

You are pretty good at that Dave, do you fancy doing a few new headers for the forum using the same logo and background colour???

We only have the one at the moment and the winter one.

Cheers, a product of to much time and not enough to do.

I'll certainly have a crack.

Are you wanting something to replace the logo thats currently at the to of the screen?

Which background colour do you mean?

Yeah the one at the top of the screen mate, I mean the grey forum background at the top of the screen, the current banner is a darker grey than the forum background, would like it to be the same so it blends in.

I will let you use your imagination for the rest of it though

stevebt wrote:

I think I did well and I have kept small There is loads I have missed but I think I have added the bits most people will know?


MY03 SUBARU IMPREZA JDM STI

mapping has been done by

Paul Blamire, Pat Hebron and Andy Forrest



Bodywork and exterior

Prodrive Pff7's 225/40/18
Chargespeed rear diffuser, Chargespeed side skirts
Chargespeed front bumper, Chargespeed vented wings


Drivetrain


Carbonetic tripple plate carbon clutch


Engine
EJ22 closed deck block
14mm WRC Head stud kit
14mm head dowel
Cosworth head stopper gasket
RCM twisted rotated pipework
RCCM 44mm eternal wastegate V band
SD Motorsport custom catch can
Lateral Wiseco custon 2.35 custom pistons including yprated
Lateral Crower h section race rods
Deck block machie for 14mm studs
ACL race series bearings, RCMS oil pump
All parts to blueprint, dry built and Plasti-gauged


Long Block and Ancillaries

AVCS heads ported and polished with uprated valves
Lateral Head gaskets, RCMS 14mm head studs
Custom 272 cams, RCM uprated oil pump
RCM inlet manifold spacers
RCM air filter (25cm tall) and custom trumpet
Magnus inlet manifold
3 bold headers "Lateral spec"
APS DR725 FMIC
HKS hyper 3" exhaust system
Zen performance oilcooler
Custom intercooler pipework
group N engine ad gearbox mounts
RCM aloy vernier puley kit for vvt
RCM turbo outlet hose for wisted kit
Induction hose
Titanium exhaust wrap
T3 Titanium turbo shield
RCM timing belt guide
custom braided turbo/VVT oil feed and all water pipe
battery relocation kit


Fueling

Bosch 044 fuel pump, -6 Braided fuel hose throughout
1000cc Injector Dynamics
SX Fuel pressure regulator
GDA fuel rails
fuellab filter


Electronics and interior

Autronics ecu mapped by Paul blamire, 4bar map sensor
Defi link system with 60mm bf Oil pressure, oil temp and manifold pressure
Pioneer AVH 6500 dvd player with avics sat nav system
Full Black leather trim
Sparco pro 2000 seats for track
Luke 6 point harneses for track

Suspension

HSD coilovers
Whiteline 24mm adjustable rear roll bar
Whiteline 22mm adjsutable front roll bar
Whiteline Anti lift kit

Brakes

AP 6 Pots with 330mm discs, Goodrige braided hoses all round
Standard rear brakes

it doesn't say what turbo you're running or am i looking over it?
btw great spec

He doesnt have one, its just a jet engine strapped onto it. Well thats what it sounded like on the rollers anyway

Yellowperil wrote:

He doesnt have one, its just a jet engine strapped onto it. Well thats what it sounded like on the rollers anyway

haha
he must have a warning sine in it => strap all small parts and children down , they may get sucked in

I have received specs from the following people:-

Carins
CDM1
DanG
Dash
D4VEW557
Dicca
Gipa
Hardy172
Jonny Gav
KGT
Lian & John
Mickymarwood
Mid_Life_Crisis
Phil555
Robbo22
Rooter
Stevebt
Thecarman
WRXSTI350
wrx-uk-ppp
yellowperial


thats 22 including mine, can people who are going and want a spec sheet doing, I need your spec by friday night at the latest.

If its not here friday night your not getting one.