think the car has gone bang

Just came home from work nice steady drive, turnes into my estate put my foot down to go up the bank and all i got was a bang and now it will not tick over when you put your foot down it just splutters. i have just read the codes on the ecu and its coming up with 22 which i think is knock sensor. i have had no cel on at all

could be just a dodgy knock sensor..

you got any nasty smoke out ov the back ?

dont know m8 it wont tick over i have to keep playin with accel to get it to run

intercooler pipe come off on the hot side hopefully, used to pop mine off fun on the old car + noticed you been messing on with the pipes on the hot side lately.

too be fair m8 thats what i thought could hear the turbo a bit but just had a quick check and they all seem to be in ok. my mate just txt and said there was some smoke comin ut the back when i pulled away

warwickd wrote:

dont know m8 it wont tick over i have to keep playin with accel to get it to run

if a hose has come off after MAF it wont tick over mate

warwickd wrote:

too be fair m8 thats what i thought could hear the turbo a bit but just had a quick check and they all seem to be in ok. my mate just txt and said there was some smoke comin ut the back when i pulled away

what colour smoke ??

white/blue or black ?

just been out reving the car a bit it revs ok until you try to hold the revs, it then goes lumpy if you try to hold them and if you rev too much it just splutters smoke looked white but its pretty dark

my guess is a hose has come off mate

dont normally go bang when ya not booting them...

Was wierd m8 went to put my foot down to accel up bank and it was if it hit fuel cut then started spluttering n that ill go out in the morning and have a look, first things first tho m8 have you got a knock sensor that works just incase i get the stupis thing running again

i,d still go for ic pipe, connector or failed chemical metal




BUST IT

warwickd wrote:

Was wierd m8 went to put my foot down to accel up bank and it was if it hit fuel cut then started spluttering n that ill go out in the morning and have a look, first things first tho m8 have you got a knock sensor that works just incase i get the stupis thing running again

was it on full boost at the time ? and yes av got a few knock sensors here mate

maxboost wrote:

i,d still go for ic pipe, connector or failed chemical metal




BUST IT

PMSL

just bust it ha ha ha ha ha ha

FINN wrote:

maxboost wrote:

i,d still go for ic pipe, connector or failed chemical metal




BUST IT

PMSL

just bust it ha ha ha ha ha ha

haha it will be gettin dosed in vpower and set alight m8 cant be arsed with cars nee more

Its sorted now lads Mark remember those "VORTEX GENERATOR SCREWS" we removed they were there so the pipe couldnt slip past the clamp on i/c pipe LMFAO

warwickd wrote:

Its sorted now lads Mark remember those "VORTEX GENERATOR SCREWS" we removed they were there so the pipe couldnt slip past the clamp on i/c pipe LMFAO

all that flapping for nowt

hav my attitude= its only nuts and bolts and a few wires

warwickd wrote:

Its sorted now lads Mark remember those "VORTEX GENERATOR SCREWS" we removed they were there so the pipe couldnt slip past the clamp on i/c pipe LMFAO

ha ha the go faster screws
so they were hold the ic pipe on screws not go faster ones lol
glad its sorted bud

maxboost wrote:

warwickd wrote:

Its sorted now lads Mark remember those "VORTEX GENERATOR SCREWS" we removed they were there so the pipe couldnt slip past the clamp on i/c pipe LMFAO

ha ha the go faster screws
so they were hold the ic pipe on screws not go faster ones lol
glad its sorted bud

Summit like that m8 at least the chemical metal held out.

FINN wrote:

warwickd wrote:

Its sorted now lads Mark remember those "VORTEX GENERATOR SCREWS" we removed they were there so the pipe couldnt slip past the clamp on i/c pipe LMFAO

all that flapping for nowt

hav my attitude= its only nuts and bolts and a few wires

Cant be arsed m8 just finished work after running round painting cat trucks all night i just cant be arsed with it, Anyhow cheers for the help once again lads